ANCHORSEAL Classic Log & Lumber End Sealer - Water Based Wax Emulsion Prevents

Description

ANCHORSEAL Classic Log & Lumber End Sealer - Water Based Wax Emulsion, Prevents up to 90% of End Checking on Cut Ends of Hardwood & Softwood … (1 Quart)
Controls rate of moisture loss to help prevent up to 90% of drying splits (end checks)
Reduces blue stain & sapstain in logs, improves yield with less waste
Water-based, non-hazardous, no solvents, soap & water cleanup
The #1 end grain sealer of the logging & lumber industry since 1980
Manufactured by U-C Coatings in Buffalo, NY for the last 40 years
ANCHORSEAL Classic is a premium wax emulsion end sealer for the prevention of end checks and drying splits in hardwood and softwood logs and lumber. By controlling the rate of moisture loss, up to 90% of end checks can be prevented. APPLICATION, COVERAGE & USE Apply ANCHORSEAL to lumber or log ends as quickly as possible after end trimming, to achieve the highest level of protection against end checking and degrade. Similar in viscosity to latex paint, ANCHORSEAL is easily applied using a brush or sprayer. Coverage: 100 sq. ft./gallon (2.5 m2/liter), or three bundles of lumber (15 to 20 logs) when applied to both ends. Coverage varies depending on application method. Equipment: For optimal coverage and application, we recommend using one of the following sprayers, available from UC Coatings: #PE4102 Electric Sprayer #PD202 Air Operated Sprayer #PG6500H Gas Engine Sprayer #BP501 Backpack Sprayer If using a spraying equipment that is different from those listed above, be sure the tip has a .021" (.55 mm) or larger opening. Application: Apply as much ANCHORSEAL as the log or lumber will hold, until it begins to drip slightly. If the product does not begin to drip, you may not be applying enough product, which could result in end splits. If there is a heavy drip, you may be applying too much of the product. Logs larger than 24" (60 cm) in diameter should be coated very heavily or twice within a 15 minute period to preserve value. Clean-Up: Use hot, soapy water to clean equipment. Solvent cleaners are not needed or recommended.
SHIPPING
Domestic Buyers
- We ship within 3 business days of payment, usually sooner
- We offer FREE shipping on all orders!
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed
- We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund.
International buyers
– please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Warranty
The warranty shall not apply to the following circumstances:
a) Damage caused by undue ware tear, misuse, improper installation or operation, neglect, accidents.
b) Damage caused by natural disasters, flood fire, lightning or pollution.
c) If item was opened, any parts removed or repaired by any unauthorized person.
d) If damaged parts are the TFT screen or the screen has less than 3 dead pixels.