-40%

Paint Set Suitable for Mitsubishi, P26 / Gl Red Metallic + Clear Varnish+Base

$ 9.26

Availability: 100 in stock
  • Condition: New
  • Area Of Application: Varnishing & Restoring
  • Vehicle Make: Mitsubishi
  • Manufacturer: Magic Paints
  • Brand: Unbranded
  • Volume: 3 x 20ml
  • Manufacturer Part Number: MP017
  • Product Type: Touch-up Pen
  • Type: Base Coat + Clear Varnish + Primer
  • Colour: P26 / GL Red Metallic

    Description

    Touch-up pen set suitable for Mitsubishi + clear coat + 1K primer (rust protection) + 2 free paint swabs
    Colour: P26 or GL Red Metallic (Orient Red Met. )
    Characteristics:
    ·
    Weather-resistant, lightfast and non-yellowing
    ·
    High yield due to higher pigmentation
    ·
    Highest filling and opacity
    ·
    very good adhesion
    ·
    Brilliant colors
    Scope of delivery:
    1 touch-up pen suitable for Mitsubishi, colour: P26 or GL Red Metallic with 20ml, undiluted, with screw cap, integrated brush and mixing ball
    1 paint stick 1K primer (rust protection) with 20ml, undiluted, with screw cap, integrated brush and mixing ball
    1 touch-up stick clear coat "glossy" with 20ml, undiluted, with screw cap and integrated brush
    2 paint swabs (the color of the paint swabs may vary)
    On request, we can also enclose detailed instructions for use (please include this in the sales record).
    Shipping:
    Shipping is usually as a maxi letter with Deutsche Post (within Germany).
    Repair scratches - how do I proceed?
    Thoroughly clean the area, if rust is visible remove it carefully with sandpaper (please make sure that the surrounding paintwork is not damaged).
    For bare plastic parts, we recommend using a plastic adhesive primer, which is applied very thinly to the bare plastic and approx. Leave for 10 to 15 minutes. You can find the plastic adhesive primer in our shop.
    Shake the 1K primer/rust protection paint stick (if necessary) vigorously and apply very carefully with the brush and allow to dry (approx. 10 to 15 minutes should usually be enough ).
    Then shake the base coat touch-up pen vigorously and carefully apply a thin layer in several layers, leaving it to dry again and again (approx. 10 to 20 mins. ), repeat the whole thing until the base coat has covered, then again for approx. Leave to dry for 15-20 minutes.
    Then shake the clear coat touch-up stick vigorously and apply carefully, then let it dry properly. The clear coat is usually more viscous than the base coat, so it should be used more sparingly.
    Here is a special TIP from us.
    If you have a stone chip on a lying surface, such as the hood or roof, we would recommend touching it up with our paint swabs. Simply dip the paint swab into the touch-up pen and carefully fill in the stone chips with this paint. The paint fills in the stone chips nicely and there is no excess of paint. You can also find paint swabs in different versions and quantities in our shop.
    Now have fun mending.
    A notice:
    All paint sticks are always checked by us for quality and consistency.
    Color deviations of the touch-up pen compared to your vehicle are possible due to the age of the vehicle and the weather.
    Remark:
    Be sure to protect from frost! Repairing the damaged car paint using our touch-up pen cannot replace a professional repair in a car paint shop!
    No liability for improper use.
    Rules for the VOC regulation
    Since January 1st, 2007, the "VOC regulation" has also applied to car paint dealers.
    (2004/42/EC or 1999/13/EC). We have to make sure that customers
    with us, for example, a paint that does not meet the VOC specification
    also only used for applications covered by the VOC regulation
    be mentioned, such as vintage car restoration or das
    filling spray cans.
    Products that comply with the VOC regulation will continue to be sold without restrictions.
    Products that do not meet the standards of the VOC regulation may only be used for the following applications.
    restoration
    of vintage cars filling aerosol spray cans painting of vehicles
    Bundeswehr, civil protection, fire brigade and those responsible for maintenance
    the forces responsible for the order - painting of vehicles in the
    public service are used exclusively in the city area
    Industrial painting (e.g. plastic parts without vehicle reference)
    The distributor is responsible for ensuring that only VOC-compliant
    Products for vehicle painting are sold and more
    also ensure that the restricted products are only for the
    mentioned applications are used.
    I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Magic Paints. I confirm that I do not comply with the respective VOC limit values
    related products that I purchase from Magic Paints,
    used exclusively for the exceptional cases provided for by law
    will. The responsibility for the intended use of the at
    Items purchased by Magic Paints are hereby transferred to me.
    Magic Paints Tobias Buhner
    Nordendstrasse 3
    06886 Lutherstadt Wittenberg
    Purchase and shipping costs:
    Checkout
    we will combine all items that you buy from us within 3 hours into one order
    please only complete your order after purchasing the last item
    When paying by bank transfer, please always enter your Ebay name in the intended use so that we can allocate the incoming payment
    the shipment usually takes place on the day of receipt of payment
    After receiving your goods
    Please check each package for damage immediately upon receipt by the service provider
    i
    If you already suspect damage to the contents from the outside picture of the package, refuse acceptance and inform us about it
    If possible, already alert the courier to damage to the package or of the content and have this acknowledged.
    inform us of any damage to the goods within 24 hours, otherwise we cannot make any claims against the parcel service
    reviews
    We evaluate immediately after receiving your evaluation
    If you are not satisfied with our products, please give us a short feedback. We always strive to keep our customers satisfied and will try to solve any problem so that no negative reviews have to be given.
    link to
    Online dispute resolution platform of the EU
    target="_blank"
    Then shake the base coat touch-up pen vigorously and carefully apply a thin layer in several layers, leaving it to dry again and again (approx. 10 to 20 mins. ), repeat the whole thing until the base coat has covered, then again for approx. Leave to dry for 15-20 minutes. If you have a stone chip on a lying surface, such as the hood or roof, we would recommend touching it up with our paint swabs. Simply dip the paint swab into the touch-up pen and carefully fill in the stone chips with this paint. The paint fills in the stone chips nicely and there is no excess of paint. You can also find paint swabs in different versions and quantities in our shop. I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Ma